NEC Storage Manager Messages Handbook Download Page 306

Page: 306 / 499

Chapter 2 Message List

301

iSM13607: Specified drive type is not supported.

[Classification] ERROR

[Explanation]

Specified drive type is not supported.

This message is output on Windows system.

[Measures]

Check the specified drive to be connected and re-execute.

iSM13608: Specified partition has already

mounted.

[Classification] ERROR

[Explanation]

Specified partition has already been mounted.

This message is output on Windows system.

[Measures]

Check the specified partition and re-execute.

iSM13609: Access of specified disk was refused.

[Classification] ERROR

[Explanation]

Access to the disk is refused.

This message is output on Windows system.

[Measures]

If there is any application accessing the specified disk, terminate the application,

and then re-execute. Refer to the description on the unmount operation for the

“NEC Storage Manager Data Replication User’s Manual (Installation and

Operation Guide for Windows)”.

Summary of Contents for Storage Manager Messages




















































































































































































































































































































































































































































































































Search results

Summary of Contents for Storage Manager Messages

Reviews:

Related manuals for Storage Manager Messages

Brands by name

Popular brands

NEC Storage Manager Messages, Handbook

Search results

Summary of Contents for Storage Manager Messages

Reviews:

Related manuals for Storage Manager Messages

Brands by name

Popular brands