Minitower Repair 6-15
5 1/4-Inch Device Removal
Use the following procedure to remove a 5 1/4-inch device from the 5 1/4-inch device
cage.
1.
Remove the top cover as previously described.
2.
Unplug all signal and power cables from the device(s) in the 5 1/4-inch device
cage.
3.
Remove the four 5 1/4-inch hard disk drive screws; two on each side.
4.
Remove the device out of the 5 1/4-inch device cage from the front of the system
unit.
Figure Section 6-14 Removing a 5 1/4-Inch Device