Setup and Operation 2-13
How to Start Setup
To start the Setup utility, follow these steps:
1.
Turn on or reboot the system. Setup displays the following message:
Press <F2> to enter SETUP
2.
Press
F2
. Setup’s Main Menu window appears similar to the following screen.
NOTE:
The screen shown is typical of the sys-
tem. The actual items on the Main Menu depend
upon the hardware installed in the system.
How to Use Setup
The Setup utility has a Main Menu window and five top-level menus with submenus.
The Main Menu window contains the following areas:
n
A title line — the top line of the Main Menu. This line displays the Setup utility
name and copyright message.
n
The menu bar — the line under the Setup title line. The menu bar contains five
top-level menus for setting system parameters.
n
A Main Menu summary window — the center area on the left side of the screen.
This area provides a summary of Main Menu Setup parameters. Main Menu
parameters can be set directly from this window or from the Main menu option in
the legend bar.
PhoenixBIOS Setup — Copyright 1992-95 Phoenix Technologies Ltd.
Main Advanced Security Power Exit
System Time:
[ :19:20]
Item Specific Help
System Date:
[03/12/1995]
Diskette A:
[1.44 MB, 3 ½"]
<Tab>, <Shift-Tab>, or
Diskette B:
[Not Installed]
<Enter> selects field.
> IDE Adapter 0 Master:
C: 540 Mb
> IDE Adapter 0 Slave:
None
> IDE Adapter 1 Master:
None
> IDE Adapter 1 Slave:
None
Video System:
[EGA/VGA]
> Memory Shadow:
[Enabled]
> Boot sequence:
[A: then C:]
> Numlock:
[Auto]
System Memory:
640 KB
Extended Memory:
7 MB
F1
Help
↑↓
Select Item
-/+
Change Values
F9
Setup Defaults
ESC Exit
←→
Select Menu
Enter Select > Sub-Menu
F10 Previous Values
10
