2-28 Setup and Operation
To hang up and log off, follow these steps at the NEC Technologies Bulletin Board:
1.
Press
Enter
(to continue).
2.
Press
G
(command for Goodbye/Hangup).
3.
Press
Enter
.
SYSTEM BOARD JUMPERS
This subsection provides jumper setting information for the system board. Situations that
require changing jumper settings include the following:
n
adding secondary cache to the system
n
upgrading the processor
n
forgetting the system password.
CAUTION:
Jumpers are set correctly at the
factory.
Only change (or check) the appropriate jumper
setting if adding secondary cache, forgot the
password, or upgrading the processor. Other-
wise, keep the jumpers at their factory settings.
The following figures show jumper locations on the system board and a description of
jumper settings. Use the procedures that follow the figures to change jumper settings or to
clear a forgotten password.