Setup and Operation 2-25
Exit Menu
Selecting “Exit” from the menu bar displays the following exit options:
n
Save Changes & Exit
n
Discard Changes & Exit
n
Get Default Values
n
Load Previous Values
n
Save Changes.
The following sections describe each of the options on the Exit Menu. Note that
Esc
does
not exit this menu. Select one of the items from the menu or menu bar to exit.
Save Changes & Exit
After making the selections on the Setup menus, always select Save to make them opera-
tive.
Unlike standard RAM memory, NVRAM is sustained by an onboard battery when the sys-
tem off.
After saving the selections, the program displays this message:
Changes have been saved
Press <space> to continue
A prompt appears if attempting to exit without saving,
During bootup, Setup attempts to load the values saved in NVRAM. If the values saved in
NVRAM cause the system boot to fail, reboot and press
F2
to enter Setup. In Setup, the de-
fault values (as described below) can be loaded or change the values that caused the boot to
fail.
Discard Changes & Exit
Use this option to exit Setup without recording any changes.
