background image

EL-MF877-00                                                                                                Page  1 
Template Revision C  

Last revalidation date 09-May-2018 

                 

 

 

 

 

  

HPI instructions for this template are available at 

EL-MF877-01

  

                 

 

Product End-of-Life Disassembly Instructions 

Product Category: Personal Computers

 

Marketing Name / Model 
[List multiple models if applicable.] 

HP ProDesk 600 G6 Microtower PC

HP ProDesk 600 G6 PCI Microtower PC

 

Purpose: 

The document is intended for use by end-of-life recyclers or treatment facilities. It provides the basic instructions 

for the disassembly of HPI products to remove components and materials requiring selective treatment, as defined by EU 
directive 2012/19/EC, Waste Electrical and Electronic Equipment (WEEE). 
 
NOTE: Recyclers should sort plastic materials into resin streams for recycling based on the ISO 11469 plastic marking 
code on the plastic part. For any questions on plastic marking, please contact 

HP’s Sustainability Contact

.    

1.0

 

Items Requiring Selective Treatment

 

1.1 Items listed below are classified as requiring selective treatment. 
1.2 Enter the quantity of items contained within the product which require selective treatment in the right column, as 
applicable. 

Item Description 

Notes 

Quantity 
of items 
included 
in product

Printed Circuit Boards (PCB) or Printed Circuit 
Assemblies (PCA) 

With a surface greater than 10 sq cm 
 

Batteries, excluding Li-Ion batteries. 

All types including standard alkaline, coin or button 
style batteries   

Li-Ion batteries.  Include all Li-Ion batteries if more 
than one is provided with the product (such as a 
detachable notebook keyboard battery, RTC coin 
cell, etc.) 

Battery(ies) are attached to the product by (

check all 

that apply with an

 “x” 

inside the

 “[ ]”): 

[

         

] screws 

[

X

] snaps 

[

         

] adhesive 

[

         

] other.  Explain 

         

 

NOTE: Add detailed removal procedures including 
required tools in the sections 3.1 and 3.2. 

         

 

Mercury-containing components 

For example, mercury in lamps, display backlights, 
scanner lamps, switches, batteries  

         

 

         

 

Liquid Crystal Displays (LCD) with a surface greater 
than 100 sq cm 

Includes background illuminated displays with gas 
discharge lamps  

         

 

         

 

Cathode Ray Tubes (CRT) 

 

         

 

         

 

Capacitors / condensers (Containing PCB/PCT) 

 

         

 

         

 

Electrolytic Capacitors / Condensers measuring 
greater than 2.5 cm in diameter or height 

Lite-On 550W EPA92 PSU 

External electrical cables and cords 

 Power  Cord 

Gas Discharge Lamps 

 

         

 

         

 

Plastics containing Brominated Flame Retardants 

 

         

 

         

 

Summary of Contents for ProDesk 600 G6












Reviews: