![background image](http://html.mh-extra.com/html/nec/powermate-professional-9000e-service/powermate-professional-9000e-service_user-manual_248712069.webp)
3-18 Configuring the System
Running the Symbios Configuration Utility
Use the following steps to run the Symbios Configuration
Utility.
1.
Power on the system. The system boots up.
2.
This message appears on the video monitor:
Press Ctrl-C to start the Symbios Configuration Utility
Press
Ctrl+C
to run this utility.
The utility starts and the Main Menu displays.
Symbios Configuration Utility Main Menu
Status
Adapter
Port
Number
IRQ
Level
Current
Next Boot*
NVRAM
Found
SYM53C875
F800
11
On
On*
Yes
SYM53C875
F400
10
On
On
Yes
Change Adapter Status - Press Enter twice to change adapter Next Boot Status.
Adapter Boot Order - Press Enter to select and change boot order of each SCSI
adapter.
Additional Adapter Configuration - Not used.
Display Mode=Verbose - Press Enter to change display mode.
Mono/Color - Press Enter to change display from black/white to color.
Language - Not used.
Help/Quit
*Next Boot Status for this controller must be turned
OFF
if you install the optional AMI
MegaRAID EXPRESS(r) 762 Controller board in your system. See “Change Adapter
Status” above.