![background image](http://html.mh-extra.com/html/nec/powermate-professional-9000e-service/powermate-professional-9000e-service_user-manual_248712110.webp)
4-12 Installing Options
Note:
The cover fits tightly. If the cover does
not slide all the way to the front panel, make sure
that the tabs under the top cover are aligned with
the cutaway on the top of the chassis and that
the top cover is over the tops of the side panels.
4.
Secure the cover with the two screws (see the figure
“Locating cover screws” in “Removing the Side
Covers”).
5.
Replace the side covers (see “Replacing the Side
Covers”).
System Board Options
This section describes how to change options on the system
board. Procedures described in this chapter include
adding memory modules
upgrading the processor.
The following figure shows the locations of the sockets and
connectors on the system board.
Note:
See Chapter 3 for the location of the
system board jumpers and their settings.