Configuring the System 3-39
5.
Double click
Entire Network
.
6.
Click the name of the computer with the shared CD-ROM
drive. Double click the name of the shared CD-ROM
drive.
7.
Access the subdirectory that corresponds to the driver you
wish to install.
8.
Double click the
setup.exe
icon corresponding to the
driver you wish to install.
9.
Follow the prompts in the installation wizard to install the
driver.
10.
Restart the computer to ensure that the installation
process completes successfully.
System Board Jumper Settings
System board jumpers enable you to configure your system
for particular system requirements, including BMC Forced
Update Mode, Chassis Intrusion Detection, FRB Timer
Enable, Boot Block Write Protect, Recovery Boot, Password
Clear, and CMOS Clear.
The following figure shows locations of system board
jumpers. The table “System Board Jumper Summary” lists
the system board jumpers and their functions, with factory-
default settings shown in bold.
!
CAUTION
Jumpers are set correctly at the factory for your
configuration.
If your system requires a jumper change, change
only the setting for that condition. Otherwise,
keep the jumpers at their factory settings.