2-16 Setup and Operation
To change or delete the password, do the following:
1.
Highlight the “Change Password” selection on the Main Menu.
2.
Press
Enter
.
An “Enter NEW Password” message appears on the screen. Change
or delete the password, as follows.
Change the password, by entering a new password, then follow steps 3, 4 and
5, above.
Delete the password, by pressing
Enter
. A “Password Now Disabled” message
appears.
3.
Press
Enter
to return to the Main Menu.
If the password is forgotten, re-position the password jumper on the system board to
disabled (see “System Board Jumpers” later in this section).
Write to CMOS and Exit
This menu option opens a screen that saves the changes to CMOS and exit the Setup pro-
gram. Type
y
if save and exit the program or
y
to exit without saving, then press
Enter
.
Do Not Write to CMOS and Exit
This menu option opens a screen that exits the Setup program and without saving the
changes. Type
y
if to exit the program and not save the changes, then press
Enter
. Type
n
to return to the program
Summary of Contents for POWERMATE P60D - SERVICE
Page 129: ......
Page 148: ...Minitower Repair 6 17 ...