![background image](http://html.mh-extra.com/html/nec/powermate-p-etc/powermate-p-etc_user-manual_248699131.webp)
Setting System Board Jumpers 5-13
NOTE
When the jumper is set for Two PCI Slots, the
shared PCI/ISA slot functions only as an ISA slot.
!
CAUTION
Do not change the jumper from Two PCI Slots
(Default) to Three PCI Slots in network
configurations. Changing the jumper affects network
functionality.
Change PCI slot settings
5.
If you removed any expansion boards, replace them (see
“Replacing Expansion Boards” in Chapter 3).
6.
Replace the system unit cover (“Replacing the System
Unit Cover” in Chapter 3).
7.
Connect system power cables and monitor.
8.
Power on the system. The system reboots.
PCI Slots
−
J4G1
Two PCI Slots
Jumper 4-5, 1-2
Three PCI Slots
Jumper 5-6, 2-3
1 3
4 6
1 3
4 6