3-14 Installing Options
1-MB by 32- or 36-bit (4-MB stick)
2-MB by 32- or 36-bit (8-MB stick)
4-MB by 32- or 36-bit (16-MB stick)
8-MB by 32- or 36-bit (32-MB stick).
!
CAUTION
To avoid corrosion between different metals, only
use tin-plated SIMM sticks.
Checking System Memory
Use the following procedure to:
1.
check the memory installed in the system
2.
determine the SIMM configuration needed to increase
memory
NOTE
SIMM memory must be installed in pairs of
the same memory type.
3.
identify SIMM sockets.
Locate the six SIMM sockets on the system board
(see “System Board Options”).
If any cables block access to the SIMM sockets,
label and disconnect them. If any boards block access
to the sockets, remove them.
Use the following table to determine the SIMM
configuration needed to upgrade memory and to
identify the sockets for SIMM installation.
