Configuring the System 3-37
Some or all applications might not exhibit full
functionality after the Fix OS is performed. To restore the system to its
factory-installed state, perform another OS Restore using the Auto or
Custom option.
Using the Fix OS option repetitively without using
the Auto or Custom option afterward might cause unpredictable results.
To restore the system to its factory-installed state, perform another NEC
OS Restore using the
Auto
or
Custom
option (see “Launching the OS
Restore CD”).
System Board Jumper Settings
The system has an easily accessible jumper (7F4) for clearing your
password if you forgot it. If you need to clear your password, set jumper
7F4 as follows.
1.
Wake a system in sleep mode, save and close any open applications,
close Windows, power down, and unplug the system’s AC power
adapter and any external options.
To prevent damage to the system board, do not
clear your password while power is on.
2.
Remove the access panel from the bottom of the system unit (for
panel removal, see “Installing a SO-DIMM Module” in Chapter 5).
