Configuring the System 3-35
Note
Some older software might not work in a Windows 98 or
Windows 2000 system configured for FAT 32.
Note
In Windows NT 4.0 systems, the Partition Information screen
does not appear. Instead, the FAT16 Partition warning appears. This
screen is described in the following paragraph.
7.
After you select the FAT type, a FAT 16 or FAT 32 Partition warning
screen appears indicating that the system is about to partition and
format your hard drive using the FDISK program. This warning
screen contains three options: Back, Exit, and Continue.
8.
Click
Continue
. The following takes place:
!
system performs FDISK using the FAT type selected
!
system reboots
!
partitions are formatted
!
OS and drivers load from the CD.
The “Operating System Restore Completed” screen appears when all
files have been restored.
9.
Remove the CD from the CD tray.
10.
Click
OK
to reboot.
This completes the Custom Rebuild and Restore procedure.
See “NEC Application and Driver CD” for instructions on installing any
of the applications or online documents, or to install device drivers that
did not come with your system.
Restore any application or driver that was not provided by NECC by
using the vendor diskette(s) or CD-ROM(s) included in its original
packaging.