NEC POWERMATE 2000 - 01-2000 Manual Download Page 137

Page: 137 / 154

B-4 System Specifications

Sound Controller

All systems come with audio integrated on the system board. The audio is
based on the Intel 82801AB (ICHO) chip and Yamaha YMF752 chip.
Features include:

Compatible with Sound Blaster Pro

™

, Sound Blaster

™

2.0, MPU-401,

and Microsoft

Windows Sound System

™

for PC sound applications

High quality SoundScape Wave Table Music Synthesizer

Plug and Play PCI compatibility

Stereo jacks — microphone in and line in

ACPI compliant.

Network Board

The system comes with a network daughter board installed on the system
board. Features include:

Intel 82559 chip

10Base-T/100Base-TX with Wake On LAN and AOL2 support.

Graphics Controller

Systems come with the AGP graphics controller chip integrated on the
Intel i810 chipset. Features include:

230 MHz RAMDAC

Video memory shared with main memory through DVM Technology

Integrated Hardware Motion Compensation

2D/3D graphics

GMCH with DDM/DDM+.

Summary of Contents for POWERMATE 2000 - 01-2000



























































































































































Search results

Summary of Contents for POWERMATE 2000 - 01-2000

Reviews:

Related manuals for POWERMATE 2000 - 01-2000

Brands by name

Popular brands

NEC POWERMATE 2000 - 01-2000, Manual

Search results

Summary of Contents for POWERMATE 2000 - 01-2000

Reviews:

Related manuals for POWERMATE 2000 - 01-2000

Brands by name

Popular brands