IX
reflections at visual display workplaces this device must not be placed in the direct field of view.
Power management function
The projector has power management functions. To reduce power consumption, the power management functions
(1 and 2) are factory preset as shown below. To control the projector from an external device via serial cable con-
nection, use the on-screen menu to change the settings for 1 and 2.
1. STANDBY MODE (Factory preset: NORMAL)
To control the projector from an external device, select [NETWORK STANDBY] or [SLEEP] for [STANDBY MODE].
NOTE:
• When [NORMAL] is selected for [STANDBY MODE], the following terminals and functions will not work:
MONITOR OUT terminal, AUDIO OUT terminal, LAN functions. Please refer to page
39
about details.
2. Power management (Factory preset: Ready)
To control the projector from an external device, select [OFF] for [Power management].
NOTE:
• When [5 Min] is selected for [Timer], you can enable the projector to automatically turn off in 5 Min if there is no signal received by any
input or if no operation is performed.
360° projection function
Our projector support 360° projection.
Vertical 360°
菜单
ME
NU
信号源
SO
UR
CE
退出
EX
IT
决定
EN
TE
R
横向 360°
竖向 360°
(竖向与横向的组合)
Horizontal 360°
菜单
ME
NU
信号源
SO
UR
CE
退出
EX
IT
决定
EN
TE
R
横向 360°
竖向 360°
(竖向与横向的组合)
Vertical & Horizontal 360°
菜单
ME
NU
信号源
SO
UR
CE
退出
EX
IT
决定
EN
TE
R
横向 360°
竖向 360°
(竖向与横向的组合)
Important Information