NEC NP-PA1004UL-W, User Manual

Page: 71 / 236

3. Convenient Features
41
3-4. Adjustment of luminance (brightness) and energy-saving effect
You can adjust the output of the unit to a range of 50–100% (in increments of 1%) and control the
brightness after adjustment to keep it constant. Also, set the [REF. LIGHT MODE] to [ECO1] or [ECO2]
to reduce the brightness and operating sound. By saving energy consumption, the CO
2
emission
from this projector can be reduced. There are two ways to set the light mode.
Function
name
Description Page
REF. LIGHT MODE The adjustment values of the [REF. LIGHT MODE] and brightness are saved as a setting common
to all input signals.
Valid when the [MODE] (
→
page 96 ) is set to [STANDARD].
REF. LIGHT MODE
Icon at the bottom of
the menu
Description
BOOST The picture becomes brighter than the
[NORMAL] mode. However, the operating noise
and power consumption will also increase due
to control of the cooling fan according to the
brightness. The life of the optical components
may also be shortened depending on the
operating environment.
NORMAL 100% brightness
Alternatively, you can adjust the output from
50 to 100% using [REF. LIGHT ADJUST].
ECO1 Brightness will be at about 80%.
The cooling fan will also slow down accord-
ingly.
Lower power consumption
ECO2 Brightness will be at about 50%.
The cooling fan will also slow down accord-
ingly.
Lower power consumption considerably
128
LIGHT MODE Adjust the brightness and save it for each input signal.
Valid when the [MODE] (
→
page 96 ) is set to [PROFESSIONAL].
99