NEC NP-PA1004UL-W, User Manual

Page: 214 / 236

8. Appendix
184
Model name PA1004UL-W/PA1004UL-B PA804UL-W/PA804UL-B
Power con-
sumption REF. LIGHT
MODE BOOST 845 W (100-130 V AC)
810 W (200-240 V AC) 675 W (100-130 V AC)
655 W (200-240 V AC)
NORMAL 750 W (100-130 V AC)
725 W (200-240 V AC) 635 W (100-130 V AC)
615 W (200-240 V AC)
ECO1 610 W (100-130 V AC)
590 W (200-240 V AC) 515 W (100-130 V AC)
505 W (200-240 V AC)
ECO2 405 W (100-130 V AC)
395 W (200-240 V AC) 360 W (100-130 V AC)
350 W (200-240 V AC)
STANDBY Network
enabled 0.8 W (100-130 V AC) / 0.8 W (200-240 V AC)
Network
disabled 0.22 W (100-130 V AC) / 0.28 W (200-240 V AC)
Rated input current 10.5 A (100-130 V AC)
4.6 A (200-240 V AC) 8.6 A (100-130 V AC)
3.8 A (200-240 V AC)
Power cord specification 15 A or higher
External dimensions (W × H × D) 23.6" (width) × 8.2" (height) × 19.3" (depth)/
599 (width) × 208 (height) × 490 (depth) mm
(not including protruding parts)
23.6" (width) × 8.5" (height) × 19.3" (depth)/
599 (width) × 216 (height) × 490 (depth) mm
(including protruding parts)
Weight 53.8 lbs/24.4 kg
(not including lens) 53.1 lbs/24.1 kg
(not including lens)
*1 Effective pixels are more than 99.99%.
*2 This is the light output value (lumens) mounting the lens unit, NP41ZL, when the [PRESET] mode is set to
[HIGH-BRIGHT]. The light output values will be dropped according to the setting of [REF. LIGHT MODE]. If
any other mode is selected as the [PRESET] mode, the light output value may drop slightly.
*3 Compliance with ISO21118-2012
*4 If you are unable to view material via the HDMI input, this does not necessarily mean the projector is not
functioning properly. With the implementation of HDCP, there may be cases in which certain content is
protected with HDCP and might not be displayed due to the decision/intention of the HDCP community
(Digital Content Protection, LLC).
Video: HDR, Deep Color, 8/10/12-bit, Lip Sync.
Audio: LPCM; up to 2 ch, sample rate 32/44.1/48 KHz, sample bit; 16/20/24-bit
HDMI: Supports HDCP 2.2/1.4
DisplayPort: Supports HDCP 1.3
HDBaseT: Supports HDCP 2.2/1.4
*5 “Forced ECO Mode” is set depending on the temperature of the operating environment and [REF. LIGHT
MODE] setting, the projector goes into “Forced ECO Mode”. (
→
page 43 )
• For additional information visit:
US: https://www.sharpnecdisplays.us
Europe: https://www.sharpnecdisplays.eu
Global: https://www.sharp-nec-displays.com/global/
For information on our optional accessories, visit our website or see our brochure.
The specifications are subject to change without notice.