IMPORTANT SAFETY CONSIDERATIONS
1.
Never install telephone wiring during a lightning storm.
2.
Never install telephone jacks in wet locations unless the jack is specifically designed for wet locations.
3.
Never touch uninsulated telephone wires or terminals unless the telephone line has been disconnected at the
network interface.
4.
Use caution when installing or moving telephone lines.
When using your telephone equipment, basic safety precautions should always be followed to reduce the risk of
fire, electric shock and injury, including the following:
1.
Read and understand all instructions.
2.
Follow all warnings and instructions marked on the product.
3.
Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning.
4.
Slots and openings in the cabinet and the back or bottom are provided for ventilation, to protect it from
overheating. These openings must not be blocked or covered. This product should never be placed near or
over a radiator or heat register. This product should not be placed in a built-in installation unless proper
ventilation is provided.
5.
This product should be operated only from the type of power source indicated on the marking label. If you are
not sure of the type of power source available, consult with your local power company.
6.
This product normally connected with a three wire grounding type plug, a plug having a third (grounding) pin.
This plug will only fit into a grounding type power outlet. This is a safety feature. If you are unable to insert
the plug into the outlet, contact an electrician to replace your obsolete outlet. Do not defeat the safety purpose
of the grounding type plug.
7.
Do not allow anything to rest on the power cord. Do not locate this product where the cord will be damaged
by persons walking on it.
8.
Do not overload wall outlets and extension cords as this can result in the risk of fire or electric shock.
9.
Never push objects of any kind into this product through cabinet slots as they may touch dangerous voltage
points or short out parts that could result in a risk of fire or electric shock. Never spill liquid of any kind on the
product.
10. To reduce the risk of electric shock, do not disassemble this product, but refer all repairs to qualified service
personnel. Opening or removing covers may expose you to dangerous voltages or other risks. Incorrect
reassembly can cause electric shock when the appliance is subsequently used.
11. Unplug this product from the wall outlet and refer servicing to qualified service personnel under the following
conditions:
