NEC N8800-103F, User Manual

Page: 56 / 136

4-8 Windows Setup
<When the AC power is on (The power cords are plugged to the wall outlet)>
CPU/IO module 1
Status LED
AC Inlet
Connector A
Rear side of device
AC Inlet
Connector B
DUMP (NMI) Switch
PCI Slot Status LED
PCI Slot Status LED
CPU/IO module 0
Status LED
(1) Confirm the POWER LED of the CPU/IO module.
z If the POWER LED is lit, shut down the OS and unplug the AC power cord
after the POWER LED turns off.
z If the POWER LED is turned off, unplug the AC power cord.
(2) Execute the operation to be taken when AC power supply is turned off.
<When the AC power is off (The power cord is not plugged into the outlet)>
Connect the power cords to NEC Express5800/ft series in the following order:
(1) Connect the power cord to the AC inlet A connector.
(2) Connect the power cord to the AC inlet B connector.
(3) Make sure that the CPU/IO module status LED is turned off.
Preparation is now completed.