NEC N8800-103F, User Manual

Page: 125 / 136

Troubleshooting 6-11
6. Reinstall ft Server Control Software.
Reinstall ft Server Control Software referring to “Installing ft Server Control Software” (page
6-12).
7. Check disk mirroring.
If the disk mirroring is disabled, enable the mirroring again. For the method to check disk
mirroring, see “Step 8: Set Dual Disk Configuration” in Chapter 4.
IMPORTANT:
„ During disk re-synchronization, do not shut down the system until the resynchronization
is completed.
„
If the following dialog appears, confirm that the disk is mirrored and click [Yes] to restart
the system.
8.
Reboot the system.
9. After the system has rebooted, log on as a user with Administrative account.
IMPORTANT:
Check that the dual system is configured properly (confirm that the STATUS LED 2 on
the CPU/IO module illuminates green. See page 4-7 for location of the STATUS LED).
10.
Duplicate the LAN again for both onboard and option boards.
Refer to “Step 7: Set Dual LAN Configuration” on page 4-23 or “DUAL LAN
CONFIGURATION” in Chapter 3 of the separate volume of User’s Guide. Reconfigure the LAN
based on the memo you have taken.
11.
When it is necessary for the system operation, enable [OS Boot Monitoring] selected in
[Monitoring Configuration] of [Server]. See “Step 13: Enable OS Boot Monitoring Function” on
page 4-40 for details.