NEC N8800-096F User Manual Download Page 415

Page: 415 / 427

8-34 System Upgrade

Installing PCI Board

Follow the procedure below to install the board to be connected to the PCI board slot.

TIPS:

To install the PCI board, make sure the shape of the board connector matches with the shape of
the PCI board slot connector.

Remove the CPU/IO module referring to the page 8-14.

Identify the slot to which you want to install a PCI board and remove the connector cap.

IMPORTANT:

Carefully keep the removed connector cap.

Remove the PCI bracket by loosening the screw
and remove the slot cover of an expansion slot.

IMPORTANT:

Keep and store the removed slot cover with
care.

㩷

Remove the connector cap installed in the slot in which the board is installed.

TIPS:

To install the PCI board, make sure the shape of the board connector matches with the shape
of the PCI board slot connector.

IMPORTANT:

Keep and store the removed connector cap with care.

Screw

Bracket

Expansion
slot cover

Summary of Contents for N8800-096F












































































































































































































































































































































































































































Search results

Summary of Contents for N8800-096F

Reviews:

Related manuals for N8800-096F

Brands by name

Popular brands

NEC N8800-096F, User Manual

Search results

Summary of Contents for N8800-096F

Reviews:

Related manuals for N8800-096F

Brands by name

Popular brands