NEC N8800-096F, User Manual

Page: 133 / 427

3-38 Windows Setup and Operation
FILE CHECK FEATURE OF GeminiEngine Control
Software
To verify that files that construct software for controlling duplex operation (GeminiEngine Control
Software) are kept properly, the NEC Express5800/ft series has a file check feature. This feature
runs at a system startup and when logging on as an administrator user that set up the system.
This feature is automatically installed at installation by Express Setup.
Checking files
The file check feature of GeminiEngine Control Software is performed at the following two
occasions:
z
When starting OS
Checks files as a task that is automatically run at an OS startup. FLVERCHK.EXE is registered
as a hidden task in the task scheduler, and it is set to run at a system startup.
The check result is recorded in event log.
z
When logging on as the user that performed setup of the server (Administrator of the
build-in account)
Checks files when logging on as a user that set up the server. A shortcut to FlVerChk.exe is
registered in the startup folder of the user, and files are checked when logging on.
When invalid update is detected, the check result is displayed on the [GeminiEngine Control
Software File Checker] dialog.
When you logged on as a user other than the one that set up the system, the file check feature
of GeminiEngine Control Software is not run. If you want to run the file check feature when
logging on, copy the shortcut to FlVerChk.exe in the startup folder of the user that set up the
system (usually, it is located at C:\Documents and Settings\Administrator\Start
Menu\Programs\Startup) to the startup folder of the user to run the file check. Administrator
authority is required for running the file check.
FlVerChk.exe is stored at C:\Program Files\NEC\HAS_SW\VERCHK\BIN\Support. If you
cannot access the startup folder of the user that set up the server, create a shortcut to
FlVerChk.exe, and store it in the startup folder of the user to run the file check.
In those cases, the file check feature is run temporarily and does not reside in the system. Use these
settings as they are in order to detect invalid update of GeminiEngine Control Software at an early
stage.