7> Select a Boot device.
Make sure to select LUN 0 device for the Boot device.
When you have selected a device, you see a window to enter a starting number for the device’s
LUNs like:
ALPA:B3(7D) WWPN:21000016 97122446
Enter two digits of starting LUN (Hex): 00
<ESC> to Previous Menu
8> Enter “00” (indicating LUN0) for the LUN starting number. Then, a window to select an LUN for the
device is displayed.
Emulex LightPulse FC BIOS Utility. KA6.01a12
01: LPe16002B-M6-N Bus#: 02 Dev#: 00 Func#: 01
Mem Base: FE700000 Firmware Version 1.1.35.0 BIOS: Disabled
Port Name: 10000090FA21129 Node Name: 20000090FA21129
Link Status: Link UP
ALPA:B3 SelectedID:7D WWPN:
21000016 97122446
01. LUN:00 NEC DISK ARRAY 1000
02. LUN:01 NEC DISK ARRAY 1000
Enter <Esc> to exit <PageDn> to Next Page
<
↑
/
↓
> to Highlight, <Enter> to Select
Copyright (c) 1997-2012 Emulex. All rights reserved.
9> Enter “01” (LUN00). Then, you see a window to select how to boot this device.
DID:0000B3 WWPN:21000016 97122446 LUN:00
Boot this device via WWPN
Boot this device via DID
<ESC> to Previous Menu
<
↑
/
↓
> to Highlight, <Enter> to Select
Notice
- 56 -