10> Select “Boot this device via WWPN”. Then, you see Boot device’s settings window again.
Confirm that the top item on the list is “USED”.
Emulex LightPulse FC BIOS Utility. KA6.01a12
01: LPe16002B-M6-N Bus#: 02 Dev#: 00 Func#: 01
Mem Base: FE700000 Firmware Version 1.1.35.0 BIOS: Disabled
Port Name: 10000090FA21129 Node Name: 20000090FA21129
Link Status: Link UP
List of saved Boot Devices:
1. Used DID:000000 WWPN:21000016 97122446 LUN:00 Primary Boot
2. Unused DID:000000 WWPN:00000000 00000000 LUN:00
3. Unused DID:000000 WWPN:00000000 00000000 LUN:00
4. Unused DID:000000 WWPN:00000000 00000000 LUN:00
5. Unused DID:000000 WWPN:00000000 00000000 LUN:00
6. Unused DID:000000 WWPN:00000000 00000000 LUN:00
7. Unused DID:000000 WWPN:00000000 00000000 LUN:00
8. Unused DID:000000 WWPN:00000000 00000000 LUN:00
<
↑
/
↓
> to Highlight, <Enter> to Select
Copyright (c) 1997-2012 Emulex. All rights reserved.
11> Press <ESC> key to return to the menu like:
Emulex LightPulse FC BIOS Utility. KA6.01a12
01: LPe16002B-M6-N Bus#: 02 Dev#: 00 Func#: 01
Mem Base: FE700000 Firmware Version 1.1.35.0 BIOS: Disabled
Port Name: 10000090FA21129 Node Name: 20000090FA21129
Link Status: Link UP
Enable/Disable Boot from SAN
Scan for Target Devices
Reset Adapter Defaults
Configure Boot Devices
Configure Advanced Adapter Parameters
Enter
＜
Esc> to Previous Menu
<
↑
/
↓
> to Highlight, <Enter> to Select
Copyright (c) 1997-2012 Emulex. All rights reserved.
- 57 -
