If the above menu is not displayed and the window has gone to the next one,
press <Alt>, <Ctrl> and <Del> keys simultaneously to reboot the computer. Then,
start the steps from the beginning.
The LPe16002B of Function “00” is Port0 and Function “01” is Port1.
The message sample is just for your reference. Some of them may be different
depending on the computer or its configurations.
4> When the menu is displayed, select the port connected to the Fibre Channel device. Then, you
see the information window.
Emulex LightPulse FC BIOS Utility. KA6.01a12
01: LPe16002B-M6-N Bus#: 02 Dev#: 00 Func#: 01
Mem Base: FE700000 Firmware Version 1.1.35.0 BIOS: Disabled
Port Name: 10000090FA21129 Node Name: 20000090FA21129
Link Status: Link UP
Enable/Disable Boot from SAN
Scan for Target Devices
Reset Adapter Defaults
Configure Boot Devices
Configure Advanced Adapter Parameters
Enter
<
Esc> to Previous Menu
<
↑
/
↓
> to Highlight, <Enter> to Select
Copyright (c) 1997-2012 Emulex. All rights reserved.
Tips
- 54 -