55
Settings (M8)
2
Locks
Sets the
Dial lock
,
Auto lock
and
i-
mode lock
functions.
2
Every time you change the
Locks
setting, entering the
handset code is required.
2
If you enter the incorrect handset
codes three times in a row, Dial
lock forces your N600i into the
lock condition for 30 minutes.
However, if you turn off the
power during the forced dial lock
and then turn on it again, N600i
extends the lock for more 30
minutes.
Dial
lock
:
This cancels any key operation
except for making emergency calls,
answering a call with the
Send
key,
rejecting a call with the
End
key,
using the
End
key to turn the N600i
on/off, turning off the alarm with any
key and adjusting the volume of the
earpiece.
You can also turn
Dial lock
on/off
from the Home screen. Press
Options
on the Home screen and
select
7
(
Dial lock
).
Auto lock
:
Turns on/off the automatic lock
function. With
Auto lock
on, the
phone is protected by
Dial lock
automatically when you switch on
your phone.
i-mode lock:
Turns i-mode lock on/off. If this
setting is enabled, no i-mode
operations including iMail/iMMS
messages are available.
No Security
3
Set codes
Sets the codes for
PIN1
,
PIN2
,
handeset
and
private PIN
.
Activate PIN1:
PIN1 is used to power on your
N600i. Selects
Enable
or
Disable
.
New PIN1
:
Changes the PIN1 number. Enter
the current PIN, the new PIN (4-8
digits) and then the new PIN again
for confirmation.
New PIN2
:
Changes the PIN2 number. Enter
the current PIN, the new PIN (4-8
digits) and then the new PIN again
for confirmation.
Unlock PIN2
:
Unlocks the lock condition. The
PUK2 input screen appears by
using this function.
2
This function is available only
when you enter your PIN
incorrectly three times in a row
and the USIM card is locked.
You can unlock it by using your
PIN Unlock Key (PUK).
New handset code
:
Changes the handset code required
to confirm important actions, such
as deleting all Contact list entries.
This requires the Code Number to
prevent accidental mistakes.
To change the handset code, enter
a new code (4 digits), then enter the
new code again for confirmation.
2
When you buy your N600i, the
Code Number is set to 0000.
New private PIN
:
Changes the private PIN number.
Input the current password for the
private PIN, the new password (4-8
digits) and then the new password
again for confirmation.
No Security
Summary of Contents for N600i
Page 79: ......
Page 80: ...v1 3 0 MDY 000026 EAA7 July 2005 1st edition ...
