65
Text Entry
Symbol Input
To input symbol(s), two menus are available: Symbol input
menu and Multi symbol input menu.
By using the Symbol input menu, you can quickly select a
symbol and return to text editing, while in the Multi symbol
input menu, you can select up to 12 symbols at a time.
Symbol input menu
To open the Symbol input menu, press the
key in any
input modes.
The Symbol input menu is displayed as follows:
☛
Highlight the line in which the symbol you want is
located. You can move the highlighted line by using
the
4-way navigation
key.
☛
Find the keypad number displayed above the symbol
and press the key. The temporary symbol menu
disappears after inserting a symbol.
2
You can cancel the temporary symbol menu by pressing
the
key.
Multi symbol input menu
To open the Multi symbol input menu, press and hold
the
key in any input modes.
Input one or more symbols using the same operation as in
the Symbol input menu as described in
Symbol input
menu
above. To complete symbol input and return to text
editing, press
SK1
(
OK
). To cancel symbol input, press
SK2
(
CANCEL
).
Options
☛
Press
Options
on the Text entry field and the
following functions are available.
Symbol input
menu
Multi symbol input
menu
No Settings
1
Insert object
Inserts the symbols or pictographs.
1
Insert
symbols
(Refer to
Symbol Input
in this
section.)
2
Insert
pictograph
Inserts the pictographs.
2
Input method
Selects the input mode.
1
T9
(Refer to
Multitap Text (ABC) Input
,
Numeric Input
and
T9® Text Input
in this section.)
2
ABC
3
123
3
Copy/cut/other You can copy, cut, delete or replace a
block of text.
2
Before performing this function,
move the cursor to the starting
point using the 4-way navigation
key to specify the starting point
on the text entry field.
2
Pressing and holding the
key
also starts this function.
2
After the block of text is
selected, pressing
SK1
to copy
or
SK2
to cut the block is
available.
2
You can also use
Options
to
choose the functions from
Copy
,
Cut
,
Delete
,
Replace
or
New
selection
.
2
Pressing
Options
and
Replace
allows you to replace the
selected text by the text on the
clip board.
Summary of Contents for N600i
Page 79: ......
Page 80: ...v1 3 0 MDY 000026 EAA7 July 2005 1st edition ...
