English-19
English
USB SELECTION
Change the USB upstream input (USB or USB-C) associated with the current display input. When connecting a
computer to each of the upstream ports, the monitor's USB downstream ports can be used by selecting this setting for
the current input signal.
You can change the active display and upstream USB port combination by using the INPUT key (see
page 13
).
When using only one upstream port, the connected upstream port is used by default.
NOTE:
To avoid data loss, before changing USB upstream ports, ensure that no USB storage devices are in use by
the operating system of the computer attached to the USB upstream port.
FACTORY PRESET
Selecting Factory Preset allows you to reset all OSD control settings back to the factory settings except Language,
OSD Lock Out and items in Multi Display tag. Individual settings can be reset by touching the “
/RESET” key.
MENU Tools
LANGUAGE
Selects the language used by the OSD.
OSD TURN OFF
The OSD menu will stay open as long as it is in use. You can select how long the monitor waits after the last key touch
to close the OSD menu. The preset choices are 10-120 seconds by 5-second increments.
OSD LOCK OUT
This control completely locks out access to all OSD control functions except for Brightness, Contrast and Volume.
To activate the OSD Lock Out function, open the OSD menu, select OSD LOCK OUT, then touch “SELECT” and
RIGHT simultaneously. To deactivate, touch “SELECT” and LEFT simultaneously.
OSD ROTATION
This controls the OSD menu rotation.
Depending on the image angle (monitor rotation), select a suitable OSD rotation setting.
NOTE:
Please set the KEY GUIDE to “ON” to display the key guide.
Setting (Angle)
Image
Key guide
0
: LEFT
: RIGHT
: DOWN
: UP
90
180
270