NEC Mu754202 Datasheet Download Page 1

Page: 1 / 66

The

PD754202 is a member of the 75XL Series of 4-bit single-chip microcontrollers that enable data processing

equivalent to that of an 8-bit microcontroller.

It features expanded CPU functions compared to the 75X Series and enables high-speed, low-voltage operation

at 1.8 V, making it suitable for battery-driven applications.

The

PD754202(A) is a higher-reliability product compared to the

PD754202.

Detailed function descriptions, etc., are provided in the following user’s manual. Be sure to read it

when designing.

PD754202 User’s Manual: U11132E

FEATURES

•

Key return reset function for keyless entry

•

Low-voltage operation: V

= 1.8 to 6.0 V

•

On-chip memory

•

Program memory (ROM): 2048

8 bits

•

Data memory (RAM)

: 128

4 bits

•

Variable instruction execution time useful for high-speed operation and power save

•

0.95, 1.91, 3.81, 15.3

s (at 4.19-MHz operation)

•

0.67, 1.33, 2.67, 10.7

s (at 6.0-MHz operation)

•

Compact package (20-pin plastic shrink SOP (300 mil, 0.65-mm pitch))

APPLICATIONS

Automotive electronics such as keyless entry units

The

PD754202 and

PD754202(A) have different quality grades. Unless otherwise specified, descriptions in

this data sheet apply to the

PD754202.

MOS INTEGRATED CIRCUIT

PD754202, 754202(A)

Document No. U12181EJ1V0DS00 (1st edition)
Date Published May 1997 N
Printed in Japan

4-BIT SINGLE-CHIP MICROCONTROLLERS

1997

DATA SHEET

The information in this document is subject to change without notice.

Summary of Contents for Mu754202



































































Search results

Summary of Contents for Mu754202

Reviews:

Related manuals for Mu754202

Brands by name

Popular brands

NEC Mu754202, Datasheet

Search results

Summary of Contents for Mu754202

Reviews:

Related manuals for Mu754202

Brands by name

Popular brands