NEC MT2200, User Manual

Page: 117 / 192

5-27
Upgrades and Options
Power Supply Module
The following sections provide procedures for removing
and installing a power supply module.
Removing a Power Supply Module
If the amber LED on a power supply module is
illuminated, the power supply module can be hot
swapped. If the amber LED on a power supply module is
not illuminated, it is recommended that power to the
system be turned off, before removing the power supply
module.
To remove a power supply module, perform the
following steps (see Figure 5-11).
1. Press the locking clip on the release-handle with
your thumb.
2. Pull the release-handle with your index fingers.
3. Remove the power supply module.
Figure 5-11. Removing a Power Supply Module
Pull
Lever
Down
Press
In
Clip