NEC M100 User Manual Download Page 291

Page: 291 / 459

Release 6.0

291

User Guide

Chapter 10 Troubleshooting

b. Other errors

iSM31024

Restriction on the logical disk number (LDN) specified in the
system area.

iSM31025

The maximum number of options have been exceeded.

iSM31026

Duplicated option.

iSM31027

An invalid related option has been specified.

iSM31028

Invalid option name.

iSM31029

Configuration settings are not started.

iSM31031

Unlocking licenses are not done.

iSM31044

The disk array does not support creation of LD set.

iSM31056

Upper limit of LD set creation.

iSM31057

The specified LD set name is invalid.

iSM31058

The specified LD set is not found.

iSM31059

The specified LD set exists.

iSM31060

The specified platform is not supported.

iSM31061

Operation on invalid partition.

iSM31098

Partition status has been updated.

iSM31108

The specified LD set is locked.

iSM31147

The specified platform is not supported.

iSM31150

The specified initiator set is set to another LD set.

iSM31151

The specified LD set is being used.

iSM31152

Upper limit of initiator addition.

iSM31174

Exception occurred during transmission.

iSM31175

Timeout occurred with connection to NEC Storage Manager.

iSM31208

Specified LD set is designated for FC.

iSM31212

The platform of LD set does not match that of initiator.

Error Codes

Cause

Error Codes

Cause

An error occurred in Iscsicli or iscsiadm command.
(Refer to the log file for the detail on the error.

Time Out

Timeout occurred while running a command.

Service Error

An error occurred during service startup.
(Refer to the log file for the detail on the error.)

SSH Error

Error occurred during the process of SSH.
(Refer to the log file for the detail on the error.)

Summary of Contents for M100












































































































































































































































































































































































































































































Search results

Summary of Contents for M100

Reviews:

Related manuals for M100

Brands by name

Popular brands

NEC M100, User Manual

Search results

Summary of Contents for M100

Reviews:

Related manuals for M100

Brands by name

Popular brands