NEC iLO 5 User Manual Download

Page: 48 / 335

•

Cryptographic—Tests security features.

•

NVRAM—Tests the subsystem that retains nonvolatile configuration data, logs, and settings.

•

Embedded Flash—Tests the state of the system that can store configuration, provisioning,
and service information.

•

Power Management—Tests functions related to power measurement, power capping, and
power management.

•

CPLD—Tests the programmable hardware in the server.

•

Host ROM—Checks the BIOS to determine whether it is out-of-date compared to the
management processor.

•

Supported Host—Checks the management processor firmware to determine whether it is
out of date for the server hardware.

•

EEPROM— Tests the hardware that stores basic iLO properties that are assigned during the
manufacturing process.

Summary of Contents for iLO 5
















































































































































































































































































































































Search results

Summary of Contents for iLO 5

Reviews:

Related manuals for iLO 5

Brands by name

Popular brands

NEC iLO 5, User Manual

Search results

Summary of Contents for iLO 5

Reviews:

Related manuals for iLO 5

Brands by name

Popular brands