275
17. Managing iLO reboots, factory reset, and
NMI
Rebooting (resetting) iLO
In some cases, it might be necessary to reset iLO; for example, if iLO is not responding to the
browser.
Using the Reset option does not make any configuration changes, but ends all active
connections to the iLO firmware. If a firmware file upload is in progress, it is terminated. If a
firmware flash is in progress, you cannot reset iLO until the process is finished.
iLO reset methods
•
Click Reset on the Diagnostics page in the iLO web interface.
•
Use the CLI.
•
Use the BMC Configuration Utility.
•
Use the server UID button on supported servers.
•
Use the iLO RESTful API.
•
Use IPMI.
If none of these methods are available or working as expected, you must power down the server
and disconnect the power supplies.
Rebooting (resetting) the iLO processor with the web interface
Prerequisites
Configure iLO Settings privilege
Procedure
1.
Click Information in the navigation tree, and then click the Diagnostics tab.
2.
Click Reset.
3.
When prompted to confirm the request, click OK.
iLO resets and closes your browser connection.
Rebooting (resetting) iLO with the BMC Configuration Utility
Prerequisites
Configure iLO Settings privilege
Procedure
1.
Optional: If you access the server remotely, start an iLO remote console session.
2.
Restart or power on the server.
3.
Press F9 in the server POST screen.
Summary of Contents for iLO 5
