287
Unable to access the iLO login page
Symptom
The iLO web interface login page will not load.
Solution 1
Cause
The SSL encryption level in the browser is not set to 128-bit or higher.
The SSL encryption level in iLO is set to 128-bit or higher and cannot be changed. The browser
and iLO encryption levels must be the same.
Action
1.
Set the SSL encryption level of your browser to 128-bit or higher.
Solution 2
Cause
iLO is configured to use the Shared Network Port, and NIC teaming is enabled for the NIC the
Shared Network Port uses. In this configuration, network communications might be blocked in
the following cases:
The selected NIC teaming mode causes the switch that iLO is connected with to ignore traffic
from the server NIC/port that iLO is configured to share.
The selected NIC teaming mode sends all traffic destined for iLO to a NIC/port other than the
one that iLO is configured to share.
Action
1.
Ensure that your Shared Network Port configuration follows the iLO NIC teaming guidelines.
Unable to connect to iLO after changing network settings
Symptom
iLO is inaccessible after an update to the network settings.
Cause
The NIC and the switch settings are not the same.
Action
1. Verify that both sides of the connection (the NIC and the switch) have the same settings for
transceiver speed autoselect, speed, and duplex.
For example, if one side is autoselecting the connection, the other side must use the same
Summary of Contents for iLO 5
