4
To connect the aerial
To prepare the remote control
Installation
Optimum reception of colour requires a good signal and will generally mean that an outdoor aerial must
be used. The exact type and positioning of the aerial will depend upon your particular area.
Notes
●When using an outdoor aerial, disconnect
the leads of the indoor aerial, if connected,
from the aerial terminal socket.
●It is recommended that the 75-ohm coaxial
cable be used to eliminate interference and
noise which may occur due to radio wave
conditions.
●The aerial cable should not be bundled with
the power cord and the like.
Using the ATT(attenuator) switch (See page 6)
When visual interference occurs, set the ATT switch to
ON using a small screwdriver.
Battery installation
Tips for remote operation
1
2
Remove the battery cover.
Insert two size AA batteries matching the +/-
polarities of the battery to the +/- marks inside
the battery compartment.
●When the remote control will not be used for a
long period of time or when the batteries are
worn out, remove the batteries to prevent
leakage.
●Do not throw the batteries into a fire. Dispose
of used batteries in the specified manner.
●Do not drop, dampen or disassemble the
remote control.
Effective range
Summary of Contents for FP-68T30
Page 43: ...P N 48586916E101 R0 ...