NEC FP-68T30, Instruction Manual

Page: 4 / 43

3
Features
INTRODUCTION
Installation
16:9 screen
You can select a desired 16:9 (wide screen) screen mode for movies as well as the normal 4:3 picture
mode.
A variety of AV terminals for external equipment connection.
●Two sets of video/audio inputs on the rear and one set on the side.
●S-VIDEO terminals.
●One set of monitor output terminals.
Selectable picture and selectable sound
Allows one-touch selection of your favorite picture quality and tone quality.
NICAM and German stereo/bilingual broadcasts receivable
Off-timer and On-timer
Turns off the TV automatically and will turn it back on at a preset time.
●INSTALL the unit in a room where direct light will not fall upon the screen.
Tonal darkness or a reflection on the picture screen may cause eyestrain. Soft and indirect lighting is
recommended for comfortable viewing.
●ALLOW enough space between the unit and the wall for proper ventilation.
●AVOID excessively warm locations to prevent possible damage to the cabinet or components.
●RATED VOLTAGE: 110-240V~, 50/60Hz
Automatic degaussing
All colour television receivers are sensitive to magnetic influences usually caused by either moving the
receiver from one place to another or using certain electrical appliances near the receiver. This residual
magnetism, as it is called, sometimes causes distortion which gives rise to
“blotchy”areas of colour
in the picture. To avoid these effects, the receiver incorporates an automatic degaussing switch.
This circuit removes any residual magnetism in the metal parts of the picture tube and ensures that
each time the receiver is turned “ON”using the main switch, the purity of the colours displayed on the
screen remains true and lifelike. If the unit is moved or made to face a different direction, the main
switch must be off at least 30 minutes in order for the automatic degaussing circuit to operate properly.
INTRODUCTION