© NEC Corporation 2019 43
Install Cabinets for Bottom-Row on Power Bar
Use the grip handles on the cabinet (Figure
51, A) to bring it into position at left corner
on the Power bar.
Align together the Cabinet hanger pins with
the frame support sockets (B) and the Corner
alignment pins on the Power bar (C).
Lower the cabinet onto the Power supply
socket (D), gently pressing it until it sits
firmly.
Notice
Place the cabinet carefully and straight on top of the
Power supply socket. Otherwise, the connector may
be pushed out and not function properly.
Figure 51: Installing the First Cabinet
Install further cabinets until the first row is
complete.
Figure 52: Installing Additional
Cabinets – First Row
Connect each cabinet to its adjacent cabinets
with the Screw connections.
Place a delivered Allen screw (E) in the
screw connection anchor.
Only finger-tighten the screw to the
Counter plate (F) in the other cabinet.
Figure 53: Locking Two Modules
Notice
Do not tighten the Screw connection too much.
Otherwise the cabinets cannot be aligned later on.
C
A
B
D
A
C
B
D
E
F
Commented [A2]:
Doctima @NEC: Is this note
relevant for FE?
