© NEC Corporation 2019 51
Remove the Cabinet alignment brackets.
Install the Pixel cards.
Mount 4 × 2 Pixel cards onto each cabinet. Start with the bottom row, then top row.
Figure 70: Installing the Pixel Cards
Ensure that the surface of the LED Wall is even.
If a Pixel card sticks out, minimize the
protrusion with the level screws (A) in the
cabinet.
Remove the Pixel card with the Service
tool (Figure 107, p. 74).
Adjust the level screws in the cabinet.
Re-install the Pixel card and check if it
is level to the other Pixel cards.
Figure 71: Level Screws
The LED Wall is completely installed.
A
