2. BIOS Setup Utility (SETUP)
Express5800/T110i-S User’s Guide
116
Chapter 3 Setup
2.4
Cases that Require Changes
Use SETUP to change a parameter in the following cases. Other than cases described below, do not change
the settings. The list of SETUP parameters and factory settings are described in
Chapter 2 (1. System BIOS)
in "
Maintenance Guide
".
Category
Description
To be changed
Remark
Basic
Change date and time
Main
System Date
Main
System Time
Configurable on OS
On/Off NumLock on power ON
Boot
Bootup Numlock State
On/Off the function to display
the NEC logo during POST
Boot
Quite Boot
Disabled
By pressing <Esc> key, prevent
the display of the logo.
Optional
board
When an optional board is
installed, set to
Disabled
for
Option ROM for all PCI devices
except for the boot device.
Advanced
PCI Configuration
PCI
Device Controller and Option ROM
Settings
PCI Slot n Option ROM
Enabled
n
is PCI slot number of the RAID
controller
Advanced
PCI Configuration
PCI
Device Controller and Option ROM
Settings
LAN1 Option ROM Scan
Disabled
Option ROM on LAN1 must be
disabled.
Memory
Configure the memory after the
DIMM is added or exchanged.
Advanced
Memory Configuration
Memory Retest
Yes
After rebooting, the
Memory
Retest
setting changes to
No
automatically.
Boot Set
to
UEFI
in
Boot mode
depending on the installed OS.
Boot
Boot Mode
UEFI
The following OS must be set to UEFI:
-
Windows Server 2016
-
Windows Server 2012
-
Windows Server 2012 R2
-
VMware ESXi 6
-
VMware ESXi 6.5
Later
For details, see
Installation
Guide
.
Set to
Legacy
in
Boot mode
depending on the installed OS.
Boot
Boot Mode
Legacy
The following OS must be set to Legacy:
-
Windows Server 2008 R2
For details, see
Installation
Guide
.
Change the boot order of
devices
Boot
Boot Option Priorities
Change the boot priority
Use remote power on feature
(from RTC alarm)
Advanced
Advanced Chipset
Configuration
Wake On RTC Alarm
Enabled
Control from HW console
terminal
Advanced
Serial Port Configuration
Change respective setting.