![background image](http://html1.mh-extra.com/html/nec/express5800-t110i-s/express5800-t110i-s_user-manual_4068940109.webp)
1. Turning on the Server
Express5800/T110i-S User’s Guide
109
Chapter 3 Setup
1.
Turning on the Server
Turn on the server by using the following procedure.
Important Wait for at least 10 seconds before turning on the server again after the
power has been turned off.
1. Disconnect Flash FDD if applicable.
2. Turn on a display, uninterruptible power supply (UPS), and other peripherals.
3. If STATUS LED 1 turns on green and STATUS LED 2 terns on amber, wait until them are unlit.
4. Press POWER Switch at the front of the server.
POWER LED is turned on green and after a while, the
NEC logo appears on the display.
While the NEC logo is being displayed, the
self-diagnostic program (POST) runs and diagnoses the
hardware. For details, see
Chapter 3
Important Do not connect or disconnect USB device while POST is running.
POWER
LED
POWER
Switch