![background image](http://html.mh-extra.com/html/nec/express5800-t110h-s/express5800-t110h-s_user-manual_251326099.webp)
2. BIOS Setup Utility (SETUP)
Express5800/T110h-S User’s Guide
99
Chapter 3 Setup
Category
Description
To be changed
Remark
Set to
Disabled
in
X2APIC
depending on the installed OS.
Advanced
→
Processor Configuration
→
X2APIC
→
Disabled
The following OS must be set to
Disabled:
-
Windows Server 2008R2
-
VMware ESXi 5
For details, see
installation
Guide
.
Security
Set a password to restrict
operation of SETUP.
Security
→
Administrator Password
→
Security
→
User password
After a password is set, the
entry of password is displayed
when SETUP is launched.
Set a password to restrict
booting.
Security
→
Password on Boot
→
Enabled
You can select this parameter
after you set a password.
Use Trusted Boot (TBOOT)
with an optional TPM kit.
Security
→
Trusted Computing
Set to
Enabled
in the following items:
-
TPM Support
-
TPM State
-
TXT Support
If
TXT Support
is
Enabled
and
the OS is started, do not disable
TPM by a TPM management
tool. If disable TPM,
TPM
Support
or
TXT Support
cannot be changed.
In such a case, Select
Save &
Exit
→
Load Setup Defaults
.
UPS
Powerlink
When the server is supplied
with power from UPS, always
turn on the power.
Server
→
Power Control Configuration
→
AC-LINK
→
Power On
If the server is turned off by
using POWER switch, leave it
OFF even when UPS supplies
power.
Server
→
Power Control Configuration
→
AC-LINK
→
Last State
Keep the power OFF even
when UPS supplies power.
Server
→
Power Control Configuration
→
AC-LINK
→
Stay off