background image

1. Installing Internal Optional Devices 

 

Express5800/T110h-S  User’s Guide 

67

Chapter 2  Preparations 

1.11

 

Optical Disk Drive 

Procedures for replacing the standard optical disk drive with the optional internal DVD Super MULTI drive are 
described below. 

 

Important

 

Do not install a third party's drive. 

 

 

Replacing drives 

1.11.1

Follow the procedure below to replace your drive with the optional internal DVD Super MULTI drive. 

 

1. See 

Chapter 2 (1.2 Overview of Installation and Removal)

 for preparations. 

2. 

To remove the side cover and the front bezel, see 

Chapter 2 (1.3 Removing the Side Cover 

and

 1.4 

Removing the Front Bezel)

3. 

If a device or an extra 2.5-inch HDD cage is installed in the 3.5-inch expansion bay (1), remove it so 
that you can access the cable connected to the optical disk drive.   

4. 

Disconnect the SATA cable and DC power cable 
from the optical disk drive. 

5. 

Push the stopper on the right side and remove the 
optical disk drive.   

 

6. 

Remove the bracket from the optical disk drive. 

 

Stopper 

Summary of Contents for Express5800/T110h-S



















































































































Reviews: