manualshive.com logo in svg

NEC Express5800/T110h-S, User Manual

Share
Download
NEC Express5800/T110h-S User Manual Download Page 30

4. Names and Functions of Parts

 

 

 

Express5800/T110h-S  User’s Guide 

30

Chapter 1  General Description 

4.5.7 

 

LEDs for LAN connectors 

 

The LAN connectors on rear panel have LINK/ACT LED and SPEED LED. 

 

 

 

•

  LINK/ACT LED (

1, 

2, 

M) 

This LED indicates the state of the LAN port.   

 

LINK/ACT LED pattern 

Description 

On (green) 

The server is normally connected with network. 

Blinking (green) 

The server is accessing network. 

Off 

The server is disconnected from network. 

 

•

  SPEED LED (

1, 

2, 

M) 

This LED indicates which network interface is used. 

―

The standard LAN ports (

1 and 

2) support 1000BASE-T, 100BASE-TX, and 10BASE-T. 

―

The management LAN port (

M) supports 1000BASE-T, 100BASE-TX, and 10BASE-T. 

 

SPEED LED pattern 

Description

 

On (amber) 

The port is operating with 1000BASE-T interface. 

On (green) 

The port is operating with 100BASE-TX interface. 

Off 

The port is operating with 10BASE-T interface. 

 

LINK/ACT LED

SPEED LED

Management LAN Connector

LINK/ACT LED

SPEED LED

LINK/ACT LED

SPEED LED

LAN 1 Connector

LAN 2 Connector

 

Summary of Contents for Express5800/T110h-S



















































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands