3. Glossary
Express5800/T110h-S User’s Guide
111
Chapter 4 Appendix
3.
Glossary
Terms Description
BIOS Setup Utility (SETUP)
Software for setting BIOS. You can run this software by pressing <F2> key during
POST.
BMC
Baseboard Management Controller (BMC) is a built-in controller that supports the IPMI
version 2.0 protocol. BMC can manage the server hardware.
BMC RESET Switch
A switch for resetting the BMC of the server. This resets the BMC without clearing the
BMC settings.
Use the switch if the problem on the BMC occurs.
DUMP Switch
A switch that is used for collecting the memory dump if an error occurs. You can specify
the destination of the dump by using the Windows function.
EXPRESSBUILDER
Standard software for setting up the server easily. This also includes several useful
applications and instruction manuals.
EXPRESSSCOPE ENGINE 3
A name of BMC for NEC Express5800 series.
EXPRESSSCOPE Profile Key
A removable flash memory that stored the settings of BIOS and BMC. If the
motherboard of the server is replaced, you can use former settings when moving this
flash memory from the former motherboard.
Express Report Service
Software that can report the server failure to the contact center by E-mail or modem.
This software is installed with NEC ESMPRO ServerAgentService to the server.
Express Report Service
(HTTPS)
Software that can report the server failure to the contact center by HTTPS. This
software is installed with NEC ESMPRO ServerAgentService to the server.
Express Report Service (MG)
Software that can report the server failure to the contact center by E-mail, modem or
HTTPS without NEC ESMPRO ServerAgentService. This software is installed with NEC
ESMPRO Manager to "PC for Management".
ExpressUpdate
A feature for updating BIOS, firmware, driver, or software of the server. This feature is
available when NEC ESMPRO Manager cooperates with EXPRESSSCOPE ENGINE 3
and ExpressUpdate Agent.
ExpressUpdate Agent
Software for performing ExpressUpdate. This is installed to the server.
Flash FDD
An optional USB device that can use as a floppy disk drive.
Internal Flash Memory
A built-in flash memory that stored EXPRESSBUILDER as standard. You can start
EXPRESSBUILDER from it without DVD when pressing <F3> key during POST.
NEC ESMPRO
Standard software for the server management. This consists of several applications for
managing or monitoring.
NEC ESMPRO Agent
Extension
Software for performing the scheduled operations. This works with NEC ESMPRO
Manager.
NEC ESMPRO Manager
Software for managing plural servers on network.
NEC ESMPRO
ServerAgentService
Software for monitoring the server. This works with NEC ESMPRO Manager. You can
choose Service Mode or Non-Service Mode when installing this software. Service Mode
resides as the OS service and Non-Service Mode does not use the OS service to
reduce memory, CPU power, and other OS resources.
OEM driver
A Windows driver for the mass storage device.
OS standard installer
An installer that stored in Windows installation disc. Use this installer if you want to
install the OS manually.
Offline tools
Software that can confirm or change SEL, SDR, FRU, and other IPMI data. You can
start Offline tools when pressing <F4> key during POST.
PC for Management
A computer for managing the server on network. A general Windows/Linux computer
can be used as "PC for Management".
Product Info Collection Utility
Software for collecting several hardware/software statuses or event logs. You can
easily collect the data for the server maintenance by using this software.
