background image

1. Installing Internal Optional Devices 

 

Express5800/T110h-S  User’s Guide 

64

Chapter 2  Preparations 

 

Installing an extra 2.5-inch HDD cage   

1.10.4

Two hard disks can be added by using an extra 2.5-inch HDD cage (2.5-inch Hot Plug Drive Cage Kit). 

 

Install an extra 2.5-inch HDD cage in the server by using the following procedure. 

 

 See 

Chapter 2 (1.2 Overview of Installation and Removal)

 for preparations. 

1.

 

To remove the side cover and the front bezel , see 

Chapter 2 (1.3 Removing the Side Cover 

and

 1.4 

2.

Removing the Front Bezel)

 

Remove one screw and the dummy cover from the 

3.

3.5-inch expansion bay.   

 

 

 

Insert an extra 2.5-inch HDD cage into the 3.5-inch 

4.

expansion bay. Do not push the HDD cage to the 

end for connecting cables later.   

 

 

 

Connect the interface cable that comes with the HDD cage and the power cable on the 

5.

motherboard. For details, see 

Chapter 2

 (

1.14 Connecting Cables

).  

 

Push the HDD cage to the end and secure it with 

6.

two screws. 

 

 

Attach the front bezel and the side cover. 

7.

Dummy cover 

Summary of Contents for Express5800/T110h-S



















































































































Reviews: