NEC Express5800/T110h-S User Manual Download

Page: 44 / 114

1. Installing Internal Optional Devices

Express5800/T110h-S User’s Guide

Chapter 2 Preparations

Notes on setting up a RAID System

1.7.1

Note the following points when setting up a RAID system.

•

The number of hard disk drives required varies depending on the RAID level.

•

If SW RAID controller or an optional RAID controller (N8103-176/188) is used, the RAID system cannot be

built in RAID5/RAID6/RAID50/RAID60.

RAID level

The minimum number of hard disk drives required to set up a RAID system

SW RAID or

N8103-176

N8103-188 N8103-177/178

RAID 0

RAID 1

RAID 5

RAID 6

RAID 10

RAID 50

RAID 60

•

Use SAS/SATA hard disk drives or SSDs that have the same capacity and rotational speed.

•

RAID 10 using a hard disk drive of 2 TB or more cannot be supported if SW RAID controller is used.

•

When installing an OS in your RAID system, you can easily complete the setup process, including RAID

configuration and OS installation, by using EXPRESSBUILDER.

•

If you are installing the OS manually, use the RAID system configuration utility. For details of the utility,

see

Chapter 2 (5. RAID System Configuration)

in "

Maintenance Guide

" or the manual supplied with the

optional RAID controller.

Important

•

Do not change the RAID system mode to hibernate.

•

A mix of SAS and SATA drives cannot be used within the RAID system.

Summary of Contents for Express5800/T110h-S



















































































































Search results

Summary of Contents for Express5800/T110h-S

Reviews:

Related manuals for Express5800/T110h-S

Brands by name

Popular brands

NEC Express5800/T110h-S, User Manual

Search results

Summary of Contents for Express5800/T110h-S

Reviews:

Related manuals for Express5800/T110h-S

Brands by name

Popular brands