1. Installing Internal Optional Devices
Express5800/T110h-S User’s Guide
61
Chapter 2 Preparations
Insert the hard disk drive attached to the tray into
7.
the slot of the HDD cage.
When it is pushed to the end, it locks with a click.
Connect the signal cable and the power cable to the hard disk drive. Use the signal cable that come
8.
with the HDD cage. Use the power cable connected to the motherboard in advance. For details about
cable connection, see
Chapter 2
1.14.1 Internal interface cables)
.
Attach the front bezel and the side cover you removed in step 2.
9.
Removing hard disk drives
1.10.2
Remove the hard disk drives by using the following procedure.
Important When disposing of the hard disk drives, follow the instructions described in
Chapter 1
(
1.5 Transfer, movement, and disposal
) in
Safety Precautions and
Regulatory Notices
.
See
Chapter 2 (1.2 Overview of Installation and Removal)
for preparations.
1.
To remove the side cover and the front bezel, see
Chapter 2 (1.3 Removing the Side Cover
and
2.
Disconnect the power cable and signal cable from the hard disk drives.
3.
Press the part shown in the figure to unlock the HDD tray, and then remove the hard disk drive out
4.
from the HDD cage.
Assemble the server.
5.
