![background image](http://html2.mh-extra.com/html/nec/express5800-r120i-2m/express5800-r120i-2m_installation-manual_4811566060.webp)
3. Installing Windows Server 2019
Installation Guide (Windows Server 2019)
60
Chapter 1 Installing Windows
-
When using R120h-1M / R120h-1M (2nd-Gen) / R120h-2M / R120h-2M (2nd-Gen) / R110j-1 standard
network adapters and N8104-171/173/207/213/217 with the server, Wake On LAN must be configured in
the BIOS.
For information on changing settings in the BIOS, refer to the maintenance guide for each server.
The
Enable PME on shutdown
in the
Advanced
of network adapter is not a Wake On LAN setting and
should not be changed.
(4)
Using N8104-206/209
When using N8104-206/209, right-click the following
DmaRemappingCompatible
in the Registry Editor and
select
Delete
.
After select
Delete
,
Confirm Value Delete
will be displayed, select
Yes
.
If
DmaRemappingCompatible
is not exist, no action is required.
Note the following when delete
DmaRemappingCompatible
:
- Be careful when editing the registry.
- A restarting the system is required after delete
DmaRemappingCompatible
.
3.6.3
Using Graphics Accelerator
For installation with the Rapid Setup or Manual installation, the drivers are installed by Standard Program
Package.
If you install the Graphics Accelerator driver after installing Standard Program Package, install Standard
Program Package again according to
Chapter 1 (3.4 Standard Program Package Installation)
.
3.6.4
Using SAS Controller (N8103-184/E184)
The driver for SAS controller N8103-184/E184 is automatically installed by Windows Plug-and-Play.
3.6.5
Using SAS Controller (N8103-197)
For installation with the Rapid Setup or Manual installation, the drivers are installed by Standard Program
Package.
If you install the SAS controller (N8103-197) after installing Standard Program Package, install driver by
following steps.
1.
Insert the Starter Pack DVD into the optical disk drive.
2. Run
the
\packages\cp055510.exe
on the DVD to install the driver.
3.
After installing driver, restart the server.
Key : HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet
\Services\e1rexpress\Parameters
Name : DmaRemappingCompatible
Type : REG_DWORD
Data : 1