background image

1. System BIOS 

 

Express5800/R120g-2E, T120g  Maintenance Guide 

93

Chapter 2  Useful Features 

For details about the options, see the table below. 

Option Parameter 

Description 

Password Configuration 

 

 

Administrator Password 

Up to 20 
alphanumeric 
characters 

When the <Enter> key is pressed, the 
password entry screen to set administrative 
right is displayed. 
This password can be used to access all 
SETUP menus. Password can be set only 
when SETUP is started by administrative right. 
If no password is set, SETUP starts with 
administrative right. 

User Password 

Up to 20 
alphanumeric 
characters 

When the <Enter> key is pressed, the 
password entry screen to set user right is 
displayed. With this password, access to 
SETUP menus is limited. The user password 
can be set when SETUP is started by 
administrative right or user right. 

Security Configuration 

 

– 

Password On Boot 

[Disabled] 
Enabled 

Enable or disable the feature that requires a 
password entry on boot. This option can be 
selected when "Administrator Password" is 
set. 

Disable USB Ports 

[None] 
Front 
Rear 
Internal 
Front + Rear 
Front + Internal 
Rear + Internal 
Front + Rear + Internal 

Select a port to be disabled. Note that the USB 
keyboard is enabled only while POST is 
running. 

Remote Keyboard and Mouse 

Disabled 
[Enabled] 

Enable or disable the remote keyboard and 
mouse supported by BMC. 

NVRAM Write Policy

 

[Unlock] 
Lock 

Set the operation policy to write to the BIOS 
setting (NVRAM). If “Lock” is specified, writing 
from the OS to NVRAM is restricted. This 
function can be selected only when “Secure 
Boot” is set to “Disabled.” 

Secure Boot Configuration 

 

This option can be selected only when “Boot 
Mode” is set to “UEFI.” 

Trusted Computing 

– 

This option is displayed only when the optional 
TPM kit is installed and can be selected when 
an administrator password has been set. 

 

[    ]:  Factory setting 

 

 

Summary of Contents for Express5800/R120g









































































































































































































































Reviews: